Non Asbestos Gaskets & Spiral Wound Gaskets in UAE - InMarco

24 Hrs Call +971 50 462 1148

INJOINT NON ASBESTOS GASKET SHEET

Non Asbestos

Inmarco Type NA-220

Description:

TYPE NA220 high quality heat resistant fiber (Aramid fiber) and excellent oil resistant synthetic rubber (NBR) are compounded and calendered into a gasket sheet for oil resistance required applications.

Availability:

∎ Size :L X W (1500mm x 1500mm & 1500mm x 3000mm)∎ Thickness :mm (0.5, 0.8, 1.0, 1.5, 2.0, 2.5, 3.0, 4.0, & 5)

Typical Applications:

Water, Hot Water, Oils, Mild Acids & Alkalis.

Inmarco Type NA-211

Description:

TYPE NA211 this is an economical Non Asbestos sheet that is compounded with high quality Non Asbestos fiber and filler & synthetic rubber materials. Especially, it shows a decent quality in processing & selling performance under water, hot water, mild acids and alkalis and building-fire-fighting pipe.

Availability:

∎ Size : L X W (1500mm x 1500mm & 1500mm x 3000mm)∎ Thickness : mm (0.5, 0.8, 1.0, 1.5, 2.0, 2.5, 3.0, 4.0, & 5)

Typical Applications:

Air, Water, Hot Water, Salt Solution, Mild Acids & Alkalis.

Inmarco Type NA-239

Description:

TYPE NA239 high quality Non Asbestos fiber (Aramid fiber) and excellent heat & oil resistant rubber are compounded and calendered into a gasket sheet with superior chemical resistance. Especially it shows a good sealing performance under hot oil, oil gas, etc.

Availability:

∎ Size : L X W (1500mm x 1500mm & 1500mm x 3000mm)∎ Thickness : mm (0.5, 0.8, 1.0, 1.5, 2.0, 2.5, 3.0, 4.0, & 5)
With metallic reinforcement available type NA239(M)

Typical Applications:

Water, Alkali, Salt solution, Hot oil, Oil gas, Fuels below & Organic solvents.

Inmarco Type NA-265

Description:

TYPE NA265 This Non Asbestos Sheet with carbon fillers provides superior chemical resistance and excellent heat resistance to use in steam and other high-temperature required lines. Suitable for a wide range of fluids like as fuel, lubricating, animal & vegetable oil, organic solvents, etc.

Availability:

∎ Size : L X W (1500mm x 1500mm & 1500mm x 3000mm)∎ Thickness : mm (0.5, 0.8, 1.0, 1.5, 2.0, 2.5, 3.0, 4.0, & 5)
With metallic reinforcement available type NA265(M)

Typical Applications:

Lubricating oil, fuel, Animal oil, Organic solvents, Water, Hot water, Steam, Hot oil, Oil gas, Salt solution.

Inmarco Type NA-239 Metalic

Description:

TYPE NA239 METALLIC is an excellent quality Non Asbestos gasket material with stainless steel wire-mesh inserted to be suitable for exhaust line under high temperature and high pressure (Aramid Fiber + NBR binder).

Availability:

∎ Size : L X W (1500mm x 1500mm & 1500mm x 3000mm)∎ Thickness :mm (0.5, 0.8, 1.0, 1.5, 2.0, 2.5, 3.0, 4.0, & 5)

Typical Applications:

Suitable for Water, Alkali, Salt solution, Hot oil, Oil gas, Solvents.
Not be used in Steam, Strong Acid, Alkali and Soluble chemicals.

Inmarco Type NA-265 Metalic

Description:

TYPE NA265 METALLIC is excellent quality Non Asbestos carbon fiber gasket material with stainless steel wire-mesh inserted to be suitable for exhaust line under high temperature and high pressure.

Availability:

∎ Size :L X W (1500mm x 1500mm & 1500mm x 3000mm)∎ Thickness :mm (0.5, 0.8, 1.0, 1.5, 2.0, 2.5, 3.0, 4.0, & 5)

Typical Applications:

Suitable for water, Hot oil, Oil gas, Alkali, Salt Solutions, Solvents, Strong Acid, Alkali, Suitable chemicals, etc.

contact_small.png