Ropes & Sleeves - Inmarco

24 Hrs Call +971 50 462 1148

Ropes & Sleeves

Ceramic Rope Style 123

Technical Specification :
Properties Unit Value
Style 123/123-S
Standard Length Mtr. 100 (3-10mm), 50 (12-25mm),
20 (30-50mm) &
10 (60-90mm)
Composition – Al2O3 % 42-46
SiO2 % 52-55
Fe2O3 % 1
TiO2 Traces
Max. Working Temperature °C 1260
Melting Point °C 1760
Thermal Conductivity (@ average of 1100°C) W/m-°K 0.18
Effective under pH range pH 2-12
Leachable Chloride content ppm <100
Loss on Ignition (@average of 1200°C) % 15max.
Linear Shrinkage (@ average 1200°C) % 3
Average Density Kg/m³ 600-800
Thickness mm 3.0 to 90
cross section (round/square)

Description:

STYLE 123 Ceramic Fibre Rope is diagonally braided or over braided or around a bulk ceramic rope core, the fibers are either E-Glass reinforced or Stainless Steel wire reinforced and can withstand temperature up to 1260°C.

STYLE 123 is available with special chemical treatment which will not only make the product flame proof/fire retardant but also will increase the temperature resistance up to 1400°C.

STYLE 123 conforms to ISO14000 norms and is environmentally friendly, non-toxic and non health hazardous. Ceramic products conform to physical parameter including dimensions to IS 14656. There are no specific standards for ceramic fibre rope but are generally covered under ASTM C892.

Advantages:

∎ Non toxic, non health hazardous and environmental friendly.
∎ Longer life due to no less of strength at optimum working temperature.
∎ High thermal insulation properties ensures friendly working atmosphere.
∎ Non combustible and electrically non conductive (non metallic).
∎ Increase safety of plant personnel and improves productivity.

Typical Applications:

Superior replacement of asbestos static door seals in boilers/ovens/reformers/heat exchangers/radiant tube packing core/heat treatment furnaces/thermocouple tubes/dummy bar seals/insulation of pile lines/exhaust and pipe line expansion joints/high temperature valve glands in air, fuel and gas.

Service Media:

Superior heated and saturated steam, Non oxidizing liquids and gases, Hot blast, Alumina in power and molten form, Dyes and chemicals, Mild acid and Alkalis.

Note:

∎ Custom sizes and lengths possible, please contact our technical team for your requirements.
∎ Please indicate cross section required in square or round.
Style Index :
Style Description
S – 123E E-Glass plain inter-braided ceramic packing.
S – 123S Stainless Steel wire reinforced inter-braided ceramic packing.
S – 123T E-Glass reinforced inter-braided ceramic packing impregnated with Intherm® to
enhance abrasion resistance and density.
S – 123V E-Glass reinforced inter-braided ceramic packing impregnated with special
synthetic dispersion to enhance density and temperature resistance.
S – 123ST Stainless Steel wire reinforced inter-braided ceramic packing impregnated with
Intherm® to enhance abrasion resistance and density.
S – 123SV Stainless Steel wire reinforced inter-braided packing Impregnated with special
synthetic dispersion to enhance density and temperature resistance.

Glass Rope Style 124

Technical Specification :
Properties Unit Value
Max. Working Temperature °C -240 to 500
Loss on Ignition ( @ 850°C) % 1
Thermal Conductivity ( @ 550°C) Wm-°K 0.2
Thickness mm 3.0 to 100 cross sections (round/square)
Standard Length Mtr. 100 (3-10mm)
50 (12-25mm)
20 (30-50mm)
10 (60-90mm)

Description:

STYLE 124 is a braided rope made from premium texturized electrical and chemical resistant special fiberglass in cover on cover braid.

STYLE 124 is of high tenacity and is meant for static sealing in dry condition.

STYLE 124 can also be used in dynamic condition while treated with special dispersion based on graphite, vermiculite or PTFE. This is also available with SS wire/inconnel wire reinforced to resist higher pressure and static load.

Typical Applications:

Furnace doors, Fill glass flanges and kiln cover, Chemical glass flanges in exhaust chimneys, Equipment handling highly corrosive alcohol and solvents except HF HCL and hot phosphoric acid.

Note:

∎ Custom thickness and widths possible, please contact our technical team for your requirements.
∎ Can be supplied in roll form, square or rectangular cross sections.
∎ Please specify cross section when placing order.
∎ This rope is also available with wire reinforcement. Please see below table for ordering.
Style Index :
Style Description Temperature
S – 124 Glass Fibre Packing -240°C to 550°C
S – 124T Graphite Dispersed Glass Fiber Packing -240°C to 550°C
S – 124F Inflon® PTFE Dispersed Glass Fiber Packing -240°C to 550°C
S – 124I Glass Fiber Packing Reinforced with Inconnel wires/SS wires -240°C to 550°C
S – 124IF Glass Fiber Packing Inflon® PTFE Dispersed
Reinforcement with Inconnel wires/SS wires
-240°C to 550°C
S – 124G Graphite Dispersed Glass Fiber packing Reinforced
with Inconnel wires/SS wires
-240°C to 600°C

Silica Rope Style 126

Technical Specification :
Properties Unit Value
Composition – SiO2 % 94-96
Max. Working Temperature °C 1100
Loss on Ignition % 7-12
Melting Point °C 1600
Average Density Kg/cm² 700-900
Cross sectional size mm 3.0 to 90
cross section (round/square)
Standard Length Mtr. 100 (3-10mm), 50 (12-25mm), 20 (30-50mm) & 10 (60-90mm)

Description:

SILCIA ROPE STYLE 126 is amorphous silica fiber have excellent corrosion and deterioration resistance at elevated temperatures, the braided ropes are available in square and round cross sections. These ropes are suitable in sealing applications where temperatures exceed 1000°C. These ropes do not brittle and do not lose its properties.

Advantages:

∎ Non toxic, non health hazardous. ∎ Environmental friendly.

Typical Applications:

Furnace, Oven, Boiler, Flange grooves, Exhaust steam pipes. These ropes can be effectively be used in gaseous applications as well as in liquid and viscous chemicals but are suitable for static applications only. Seal for casting moulds, as a packing in electric transformers.

Service Media:

Superior heated and saturated steam, non oxidizing liquids and gases, hot blast, etc.

Note:

∎ Custom sizes and lengths possible, please contact our technical team for your requirements.
∎ Please indicate cross section required in square or round.

Glass Sleeve Type 161

Technical Specification :
Properties Unit Value
Max. Working Temperature °C 550
Loss on Ignition % 10
Melting Point °C 1050
Inner Diameter mm 10.0 to 100
Wall Thickness mm 2.0 to 6.0
Standard Length Mtr. 30

Description:

STYLE 161 are made from superior e-glass filament yarns, texturized e-glass fibers, specially used as a cover on the electrical cables, other application include pipe protection and offer excellent insulation capabilities and can withstand in temperatures as high as 540°C.

Typical Applications:

Electrical sleeving, Cover high temperature pipes, High temperature for pipe/duct & turbine insulation, Heat treatment furnaces.

Note:

∎ Custom thickness, widths and customary coatings possible, please contact our technical team for your requirements.
∎ Available with silicone coatings.

Silica Sleeve Type 162

Technical Specification :
Properties Unit Value
Composition – SiO2 % 94-96
Max. Working Temperature °C 1100
Loss on Ignition % 7-12
Melting Point °C 1600
Average Density Kg/cm² 700-900
Inner Diameter mm 10.0 to 100
Wall Thickness mm 2.0 to 6.0
Standard Length Mtr. 30.0

Description:

STYLE 162 are generally used in protecting precious industrial cables with high temperature pipe lines to control energy loss. It can provide protection against weld splatter, fire, and extreme heat. These sleeves can be pulled over any items which are in circular cross section. Additional coating will be required to provide abrasion resistance. Can withstand temperatures up to +1000°C.

Advantages:

∎ Environmentally safe, no asbestos content, non hazardous.

Typical Applications:

Insulation wraps for pipes, Hoses and electrical cables, Isolated high temperature welding protection. Can be a good substitute upon glass tapes.

Service Media:

Superior heated and saturated steam, Non oxidizing liquids and gases, Hot blast, etc.

Note:

∎ Custom sizes and lengths possible, please contact our technical team for your requirements.

Ceramic Sleeve Type 250

Technical Specification :
Properties Unit Value
Composition – Al2O3 % 42-46
SiO2 % 52-55
Fe2O3 % 1
Ti2O2 Traces
Max. Working Temperature °C 1260
Melting Point °C 1760
Thermal Conductivity ( @ average of 1100°C) wmk 0.18
Effective under pH 2-12
Leachable Chloride content ppm 100
Loss on ignition (@ average of 1200°C) % 15
Linear Shrinkage (@ average of 1200°C) % 3
Inner Diameter mm 10.0 to 100
Wall Thickness mm 2.0 to 6.0
Standard Length Mtr. 30.0

Description:

STYLE 250 Ceramic Sleeves are woven by e-glass reinforced ceramic fibers. Ceramic sleeves offer excellent thermal and electrical insulation properties. Can be used for electrical cable sleeving and as covering of high temperatures pipes. This can withstand molten splash and offer high mechanical strength with special chemical treatment.

STYLE 250 is available with special chemical treatment which will not only make the product flame proof/fire retardant but also will increase the temperature resistance up to 1400°C.

STYLE 250 conforms to ISO1400 norms and is environmentally friendly, non-toxic and non health hazardous. Ceramic products conform to physical parameter including dimensions to IS14656. There is no specific standards for ceramic sleeves but are generally covered under ASTM C892.

Typical Applications:

Electrical sleeving, Cover high temperature pipes, High temperature for pipe, duct & turbine insulation, Heat treatment furnaces.

Note:

∎ Custom thickness and widths possible, please contact our technical team for your requirements.

Other products in the category

contact_small.png