Tapes - Inmarco

24 Hrs Call +971 50 462 1148

Tapes

Glass Tape Type 131

Technical Specification :
Properties Unit Value
Max. Working Temperature °C 550
Loss on Ignition % 10
Thermal Conductivity ( @ average 550°C) wmk 0.3
Melting Point °C 1050
Average Density grms/cc 1.2-1.4
Width mm 10.0 to 100
Standard Length Mtr. 30
Thickness mm 2.0 to 6.0

Description:

STYLE 131 is made of 100% continuous filament fiberglass and does not contain asbestos or ceramic. Tough, flexible and versatile material it can withstand temperature up to 550°C.

STYLE 131 fiberglass tape is non hazardous and it has good insulation and heat resistance properties.

STYLE 131 is non toxic, no heavy metals, and excellent heat retention capabilities.

Typical Applications:

Static door seal for boilers/oven/reformers/furnaces/heat exchangers/radiant tube packings, Dummy bar seals, Insulation of pipe lines, Exhausts and pipe line expansion joints, High temperature valve glands in air/fuel gas, etc.

Note:

∎ Custom sizes and lengths possible, please contact our technical team for your requirements.
∎ Can be supplied with graphite.
∎ This tape is also available with wire reinforcement. Please see below table for ordering.
Style Index :
Style Description
S – 131 Plain fiberglass inter-woven tape
S – 131SS Wire reinforced
S – 131AF Aluminum foil backing
S – 131G Graphite coating
S – 131SR Silicon rubberized
S – 131V Vermiculite coating

Silica Tape Type 132

Technical Specification :
Properties Unit Value
Composition – SiO2 % 94-96
Max. Working Temperature °C 1100
Loss on Ignition % 7-12
Melting Point °C 1600
Average Density Kg/cm² 700-900
Width mm 10.0 to 100
Thickness mm 2.0 to 6.0
Standard Length Mtr. 30.0

Description:

STYLE 132 is amorphous silica fiber are woven tapes from 96% pure SiO2 silica fibers. These fibers have excellent corrosion and deterioration resistance at elevated temperatures; the tapes are available in different widths & thicknesses. These tapes are suitable in sealing and thermal insulation applications where temperatures exceed 1000°C. These tapes do not brittle and do not lose its properties.

STYLE 132 silica woven taper is protected and can withstand in extreme heat, welding splatter and molten metal. The performance is extremely good and attributes resistance to fire flame.

Advantages:

∎ Non toxic, non health hazardous.
∎ Environmental friendly.

Typical Applications:

Insulation wraps for pipes, Hoses and electrical cables, Isolated high temperature welding protection. Can be a good substitute upon glass tapes.

Service Media:

Superior heated and saturated steam, Non oxidizing liquids and gases, Hot blast, etc.

Note:

∎ Custom sizes and lengths possible, please contact our technical team for your requirements.

Ceramic Tape Type 240

Technical Specification :
Properties Unit Value
Style 240-E/240-S
Width mm 2.0 to 200
Composition – Al2O3 % 42-46
SiO2 % 52-55
Fe2O3 % 1
TiO2 Traces
Max. Working Temperature °C 1260
Melting Point °C 1760
Thermal Conductivity (@ average of 1100°C) W/m-°K 0.18
Effective under pH range pH 2-12
Leachable Chloride content ppm <100
Loss on Ignition (@average of 1200°C) % 15max.
Linear Shrinkage (@ average 1200°C) % 3
Average Density Kg/m³ 600-800
Thickness mm 2.0 to 6.0
Standard Length Mtr. 30

Description:

STYLE 240 Ceramic Woven Tape is manufactured by weaving ceramic fibers reinforced with either e-glass or stainless steel wire. These tapes have high heat retention capabilities and can be used as thermal protection/energy loss of pipe lines. As wrapping of exhaust. Control thermal properties on expose pipe joints/flanges etc and can withstand maximum temperature of 1260°C.

STYLE 240 is available with special chemical treatment which will not only make the product flame proof/fire retardant but also will increase the temperature resistance up to 1400°C.

STYLE 123 conforms to ISO14000 norms and is environmentally friendly, non-toxic and non health hazardous. Ceramic products conform to physical parameter including dimensions to IS 14656. There are no specific standards for ceramic fibre rope but are generally covered under ASTM C892.

Advantages:

∎ Non toxic, non health hazardous and environmental friendly.
∎ Longer life due to no less of strength at optimum working temperature.
∎ High thermal insulation properties ensures friendly working atmosphere.
∎ Non combustible and electrically non conductive (non metallic).
∎ Increase safety of plant personnel and improves productivity.

Typical Applications:

Superior replacement of asbestos static door seals in boilers/ovens/reformers/heat exchangers/radiant tube packing core/heat treatment furnaces/thermocouple tubes/dummy bar seals/insulation of pile lines/exhaust and pipe line expansion joints/high temperature valve glands in air, fuel and gas.

Service Media:

Superior heated and saturated steam, Non oxidizing liquids and gases, Hot blast, Alumina in power and molten form, Dyes and chemicals, Mild acid and Alkalis.

Note:

∎ Custom thickness and widths possible, please contact our technical team for your requirements.
Style Index :
Style Description
S – 240E T E-Glass reinforced impregnated with Intherm® to enhance abrasion resistance and density.
S – 240E V E-Glass reinforced impregnated with special synthetic dispersion to enhance density andtemperature resistance.
S – 240 ST Stainless Steel reinforced impregnated with Intherm® to enhance abrasion resistance and density.
S – 240 SV Stainless Steel reinforced impregnated with special synthetic dispersion to enhance density and temperature resistance.

Other products in the category

contact_small.png